health information
Posts tagged Diode
SDL90C Cool-Tip Diode Laser System for Tattoo Removal, General Dermatology, Permanent Hair Removal and More
0
- Treatment Time for Dense Moustache Removal: 1 minute
- BK7 Cool Tip
- Beam Size and Shape: 1cm round ball optics
- Pulse Duration: 0.05 to 0.1 seconds
- Energy Density (fluence): 0 to 180 Jcm2
The SDL90C produces 180 Jcm2 energy density at 808nm with a pulse duration of 0.1 seconds. Pulse frequency is user-adjustable from 1-7 emissions per second. Unlike the Biotechnique Avance ‘standard’ laser epilators (SLD15, 30, 50, 80 and 100 units) the SDL ‘C’ line is has a specially designed BK7 cool tip condenser which is designed to be in contact with the skin. This allows for far greater absorption and penetration of the laser energy to the desired tissues. With surface laser epilation (again, the standard SDL line) a significant percentage of the laser energy simply bounces off the skin or is absorbed by the hair itself. This creates quite an impressive effect as the laser ‘shaves’ the skin as it treats the follicles below, however, of 180jcm2/second of energy delivered this way, only about 120jcm2 will pass through the skin. This is why the SDL ‘C’ line was developed. It is intended to be performed in conjunction with a topical gel paste (which also contains lidocaine for additional patient comfort). As the SDLC cool tip glides across the gel-coated skin it delivers high fluence pulses deeply into the desired tissues. The results are faster and more substantial than the standard SDL line of surface epilators. Amazingly, the SDLC line can also be used for surface laser epilation procedures just like the standard SDL line. This is achieved by simply holding the module 1/2 inch from the skin rather than gliding it across the gel paste. It is important to note that the SDLC series cool-tip ball lens should never contact the clients skin without protective gel paste, so surface epilation procedures should be done with extra care.
Price: $ 1,999.95
SDL60C Cool-Tip Diode Pumped ND YAG Laser System for Tattoo Removal, General Dermatology, Permanent Hair Reduction and More
0
- Treatment Time for Dense Moustache Removal: 2 minutes
- BK7 Cool Tip
- Beam Size and Shape: 1cm round ball optics
- Pulse Duration: 0.05 to 0.1 seconds
- Energy Density (fluence): 0 to 150 Jcm2
The SDL60C produces 150 Jcm2 energy density at 808nm with a pulse duration of 0.1 seconds. Pulse frequency is user-adjustable from 1-7 emissions per second. Unlike the Biotechnique Avance ‘standard’ laser epilators (SLD15, 30, 50, 80 and 100 units) the SDL ‘C’ line is has a specially designed BK7 cool tip condenser which is designed to be in contact with the skin. This allows for far greater absorption and penetration of the laser energy to the desired tissues. With surface laser epilation (again, the standard SDL line) a significant percentage of the laser energy simply bounces off the skin or is absorbed by the hair itself. This creates quite an impressive effect as the laser ‘shaves’ the skin as it treats the follicles below, however, of 180jcm2/second of energy delivered this way, only about 120jcm2 will pass through the skin. This is why the SDL ‘C’ line was developed. It is intended to be performed in conjunction with a topical gel paste (which also contains lidocaine for additional patient comfort). As the SDLC cool tip glides across the gel-coated skin it delivers high fluence pulses deeply into the desired tissues. The results are faster and more substantial than the standard SDL line of surface epilators. Amazingly, the SDLC line can also be used for surface laser epilation procedures just like the standard SDL line. This is achieved by simply holding the module 1/2 inch from the skin rather than gliding it across the gel paste. It is important to note that the SDLC series cool-tip ball lens should never contact the clients skin without protective gel paste, so surface epilation procedures should be done with extra care.
Price: $ 1,799.95
SDL100 Professional Long Pulse Diode Laser for Skin Conditions, rosacea, spider veins, tattoo removal, permanent hair removal and reduction treatments.
0
- Pulse Frequency: Adjustable from 1-10 pulses/second
- Energy Density (fluence): 0 to 220 Jcm2
- Beam Size and Shape: 2 cm line optics
- Treatment Time for Dense Moustache Removal: Under 1 minute
- 1 year warranty
The SDL100 produces an incredible 220 Jcm2 energy density at 808nm with a pulse duration of 0.1 seconds. Pulse frequency is user-adjustable from 1-10 emissions per second.
This is a great system for the busy salon or Doctor’s office.
Maximum power output is 550% greater than the recommended level for efficient laser shaving (on hair growth types 3-6: brown and black). Laser shaving is also possible with blond and red hair types (2 and 3) using carbon dye. This system is also excellent for general dermatology procedures, age spot removal, wrinkle reduction, laser resurfacing and more. May be used for tattoo removal on most inks.
System Comes With The Following
High Output Professional Diode Laser Hand Piece 220 jcm2 energy density (fluence), key lockout safety switch, laser ‘enabled’ system status LED, adjustable intensity, 2 pair of laser protection eyewear, 150ml carbon dye, tweezers and instructions.
Average safe and effective values for output intensity (fluence) and pulse frequency are included in the instruction material for various skin photo types.
If you are using cosmetics on the area to be treated containing retinoids (retin a, tretinoin, altinac, avita, trans retinoic acid, vitamin A acid, tazorac, adapalene, differin), or AHA (alpha hydroxyl acids, glycolic acid) stop using the cosmetic at least two days before the laser treatment. If you have been taking Accutane (isotretinoin) you should be off of it for two to six months before laser treatment. If you have had a microdermabrasion on the area to be treated it is best to wait seven to ten days before laser treatment.
Price: $ 3,499.95
SDL30C Cool-Tip Diode Laser System for Tattoo Removal, General Dermatology, Permanent Hair Reduction and More
01 year ago
by admin
in Health Care Services
- Treatment Time for Dense Moustache Removal: 5 minutes
- BK7 Cool Tip
- Beam Size and Shape: 1cm round ball optics
- Pulse Duration: 0.05 to 0.1 seconds
- Energy Density (fluence): 0 to 96 Jcm2
The SDL30C produces an efficient 96 Jcm2 energy density at 808nm with a pulse duration of 0.1 seconds. Pulse frequency is user-adjustable from 1-7 emissions per second. Unlike the Biotechnique Avance ‘standard’ laser epilators (SLD15, 30, 50, 80 and 100 units) the SDL ‘C’ line is has a specially designed BK7 cool tip condenser which is designed to be in contact with the skin. This allows for far greater absorption and penetration of the laser energy to the desired tissues. With surface laser epilation (again, the standard SDL line) a significant percentage of the laser energy simply bounces off the skin or is absorbed by the hair itself. This creates quite an impressive effect as the laser ‘shaves’ the skin as it treats the follicles below, however, of 180jcm2/second of energy delivered this way, only about 120jcm2 will pass through the skin.
This is why the SDL ‘C’ line was developed. It is intended to be performed in conjunction with a topical gel paste (which also contains lidocaine for additional patient comfort). As the SDLC cool tip glides across the gel-coated skin it delivers high fluence pulses deeply into the desired tissues. The results are faster and more substantial than the standard SDL line of surface epilators.
Amazingly, the SDLC line can also be used for surface laser epilation procedures just like the standard SDL line. This is achieved by simply holding the module 1/2 inch from the skin rather than gliding it across the gel paste. It is important to note that the SDLC series cool-tip ball lens should never contact the clients skin without protective gel paste, so surface epilation procedures should be done with extra care.
Price: $ 1,499.95
EPILA SI-808 Personal Laser Diode Hair Remover System
5EPILA SI-808 Personal Laser Diode Hair Remover System
- Proven technology to have 90% effectiveness in permanent hair removal
- Adjustable laser intensity (low, medium and high)
- On average one session treating an entire leg should take less than an hour
- Charger is compatible with both 110V and 220V electrical outlets
Epila is a 808 nanometer (nm) wavelength diode laser hair remover designed to be used in the comfort of your own home. The 808 nanometer (nm) wavelength is currently being used by clinics worldwide for permanent hair removal. making it safe for in-home use. It�s simple to use, power the device and start moving it over the desired treatment area. As Epila is moved over the skin, it emits light energy that is absorbed by the melanin pigment, resulting in rapid heating of the hair follicle. The heat destroys the papillae (hair follicles) that are responsible for hair growth. Epila uses a diode laser which has a longer wavelength than other lasers used for hair removal, which means will even work on darker, more pigmented skin types. On average, one session treating an entire leg should take less than an hour and should be painless, but if you experience discomfort, you can switch to a lower setting. Since the area treated will be extremely sensitive for a few days, it is wise to wear both protective clothing and sun block whenever you’re outside. In addition, plan to limit your sun exposure for a day or two after the treatment, as you can expect some slight swelling and redness. These side effects should disappear within a day and can be soothed with an ice-pack included with Epila.
Rating: 
(out of 23 reviews)
List Price: $ 199.00
Price: $ 199.00
SDL30C Standard Cool-Tip Sapphire Diode Pumped YAG Laser System for Permanent Hair Reduction and More
01 year ago
by admin
in Health Care Services
SDL30C Standard Cool-Tip Sapphire Diode Pumped YAG Laser System for Permanent Hair Reduction and More
- Pulse Duration: 0.05 to 0.1 seconds
- Pulse Frequency: Adjustable from 1-7 pulses/second
- Energy Density (fluence): 0 to 96 Jcm2
- Cool tip BK7 Ball Optics
- 1 year warranty
The SDL30C produces an efficient 96 Jcm2 energy density at 808nm with a pulse duration of 0.1 seconds. Pulse frequency is user-adjustable from 1-7 emissions per second. Unlike the Biotechnique Avance ‘standard’ laser epilators (SLD15, 30, 50, 80 and 100 units) the SDL ‘C’ line is has a specially designed BK7 cool tip condenser which is designed to be in contact with the skin. This allows for far greater absorption and penetration of the laser energy to the desired tissues. With surface laser epilation (again, the standard SDL line) a significant percentage of the laser energy simply bounces off the skin or is absorbed by the hair itself. This creates quite an impressive effect as the laser ‘shaves’ the skin as it treats the follicles below, however, of 180jcm2/second of energy delivered this way, only about 120jcm2 will pass through the skin.
This is why the SDL ‘C’ line was developed. It is intended to be performed in conjunction with a topical gel paste (which also contains lidocaine for additional patient comfort). As the SDLC cool tip glides across the gel-coated skin it delivers high fluence pulses deeply into the desired tissues. The results are faster and more substantial than the standard SDL line of surface epilators.
Amazingly, the SDLC line can also be used for surface laser epilation procedures just like the standard SDL line. This is achieved by simply holding the module 1/2 inch from the skin rather than gliding it across the gel paste. It is important to note that the SDLC series cool-tip ball lens should never contact the clients skin without protective gel paste, so surface epilation procedures should be done with extra care.
Price: $ 1,499.95
DM4000 is an 808 nanometer (nm) wavelength diode laser hair remover designed … clinics worldwide for permanent hair removal. making it safe for in-home use
01 year ago
by admin
in Health Care Services
DM4000 is an 808 nanometer (nm) wavelength diode laser hair remover designed … clinics worldwide for permanent hair removal. making it safe for in-home use
- professional results at home
- powerful
- affordable
- easy to use
- permanent hair removal and more
Long Pulse Diode Laser Hair Removal Kit
The DM4000 is a very powerful long pulse diode laser epilator and is very easy to operate. There are many home use laser epilators which have recently become available but none of which can compare with this system. A full 2000mW at 808nm makes it more than 8 times as powerful as the nearest competitor.
The laser diode is rated for an impressive 5000 hours of continuous use (about 3-5 years), so you know it will last.
Laser output is delivered by a convenient thumb switch on the comfortable stainless steel module. The emission zone treatment area is a highly precise pinpoint beam, which is perfect for hair-by-hair epilation.
Price: $ 299.95
