Blitz Rhino Ramp 8000 My car is RWD, and they work great for me < / p> I

2002 Camaro Z28 was a fall (which is, of course, RWD) with 275 width tires and I use these ramps all the time for basic things like oil changes or pulley belt replacement / and I always get a position to help on these ramps without problem, even without anyone else. My car is manual, making it easier, I do not know. I have them in line with my tires, they wedge in under my tires, then give it a few steps, so they are fixed and do not move. But I have only put in front of my tire and went to them without problem. I bought this for convenience. My car is low to the point where I need to ride on wooden boards to get my prize under it. I bought this to Autozone and had for over a year and a half and I let him rain or shine outside throughout the year and they are still very good. In any case, its almost 1 / fifth the price of these ramps that Vette guys so much love, but again they do not have much choice. ================== ======================= ====== ===================== == HIGH for 95% of vehicles out there I

now about 8 years in the property. They were very required. No bend or flex never noticed. I use them for all sub-car to work does not require the wheels are removed. They are lightweight, and simply by hanging from a screw with the hole they have already built for To save

contributions they push a lot to say, you need a sweet you have your foot on the accelerator. If you ride on ramps quickly try, you can drag the ramp. Take your time, be smooth with the gas, and you get up OK. Note: If you have a low riding car, the angle of this may not be low enough for you. The simple solution to this problem is something like a doing a “x10″ board of directors and Butt against the railing. Roll up the timber first, then continue on the ramp. For the price they are buying an A +! =================================== ======> ====== ======================= Rhino Ramp 8000 have bought for my Vette. The length of the ramp is not enough to keep the car in and out without the use of extensions of wood. Getting Started OK but down, glide the wood and cracking the bumper is a real achievement. We must drill a small hole in the wood and a small hole in the ramp for ‘the extension block in place “to prevent slippage . ========================================= === === ======================= Slides, unless it is “in the city / strong> < / p> how others have noted, I found that the ramps slide back when you try to elevate it. Especially on wet roads. I’m stuck with a few bags of gravel is that I ‘have to be overcome, which solved the problem and was able to climb ramps with no problem. It was faster, even if I jack with the gravel bed, as if I used a car jack for the elevator, that you then go to the other side and that Jack had set up and jack. So overall, these ramps saved me some time, but they are not perfect. Learn more about Blitz Rhino Ramp 8000