Labthink, the excellent supplier of equipment for monitoring and testing is the best and most complete solutions for quality assurance for the pharmaceutical, food, cosmetics, packaging, printing, dedicated adhesive, automotive, petrochemical, environment, biology, new energy, construction, aerospace and electronics in the world

medical testing protective clothing consists mainly of the following:. Barrier property (test the amount of gas transmission and verification of moisture transmission), coefficient of friction (smooth surface material), tensile strength and elongation, peel strength, the strength of the O and heat seal leakage, tearing and print quality tests. Labthink Instruments Co. Ltd, to meet the demand for testing of medical protective clothing includes protective clothing such as medical instruments follows to carry the analysis of the quality of health care business clothing.

Barrier property is defined as the barrier effect of packaging materials on the gas (eg oxygen), (water vapor by example) and others expire. Barrier property is the most important factor for durability. Instruments involved are listed below:

A. PERM -DM2/330 pressure difference and the same methods of gas permeability tester, this instrument, the differential pressure method and the method of combining pressure equal to one unit. It is applicable for testing the gas permeability of plastic films, laminated films and sheets and finished packages. This instrument is equipped with three bedrooms and temperature at random automated curve fitting. Temperature Control, Internet data management.

B. Oxygen Transmission Rate Testing System OX2/230 permeable: the principle and method of coulometric same pressure. This instrument is applicable for the audit of oxygen transfer ownership of film and sheet, as well as bottles, cans and boxes. This instrument is the basis of the master and satellite mode module: a database master key can be 9 modules per satellite with the delivery of 30 samples tested simultaneously.

C-ACC V-Series differential pressure gas permeability tester: applies to oxygen, nitrogen and carbon dioxide permeability testing of film and foil, plastic films and laminates. This series of instruments including VAC-V1, V2 and V3-ACC-ACC, etc., is in accordance with the method of differential pressure.

D. W3/330 permeability of water vapor transmission testing system? Used to test the water vapor permeability of films and plates and bottles, bags, boxes and crates. This instrument is in master mode satellite, a base master can communicate via satellite with 9 modules get tested 30 samples simultaneously.

E. TSY-T series of water vapor permeability tester: does the test water vapor transmission of materials such as packaging films and laminates and manufactures high polymers. This series of products are fully automatic, computer controlled and can be weighed. The series includes TSY-T1H, T1L and TSY TSY-T3, etc.

2 Medical Protective Clothing strength test

Medical tests protective clothing, including examination of resistance to the index as the test material strength to strength, peeling strength test films rolled hot seal strength testing, tensile strength and resistance testing pocket. Tensile strength is the maximum resistance is broken just before the device. Through tests, the damage package and joy by external forces and the resistance of packaging materials, insufficient mechanical be solved effectively. Peeling strength test, also called resistance testing complex, testing the adhesion between the layers of composite films. If the bond strength is too low, the leak is easily caused by the separation between the layers. Hot seal strength test is to examine the strength of the welds. During storage and transportation of products, low strength of the hot can cause problems such as tearing and leakage. Sleeve resistance is the index of evaluation of the anti-puncture of the packaging of a solid material.

instruments the relevant tests are:

A. XLW Auto Tensile Series: Are for skinning, heal force, and leak test tear film, laminated films, adhesives and tapes. This series of products includes XLW? XLW? B? XLW? M? XLW? PC? And XLW? G?.

B. BLD-200S Test Car Service: for the coat, and tensile tests for heat-sealing films, laminates, adhesives and tapes. The standard specifications are to 200N (100N, 50N and 30N), Mini-printer and the computer

C.. HST-H3 Heat Seal Tester: It’s for the preparation of samples for testing resistance heat seal films. Test pressure, temperature and time are adjustable. This instrument adopts microcontroller intellectual functioning and components of high-precision PID temperature control to determine the exact temperature.

D. RTD-R2 Gradation sealing instruments: five groups are made of plastic films or laminated flexible packaging films independently and came together under five temperature five groups of the sample simultaneously and efficiently 3rd

Medical protective clothing seal. Property Test

Protective Clothing Medical tests sealing property may be caused not guarantee the completeness of the whole package and prevent the loss and degradation through the lower sealing property.

A.MFY-01 Leak Tester: applies to reliability testing package sealed vacuum test chamber. Micro-computer control panel operation, digital presets and fully automatic testing.

B. LSSD -01 Leak Detector and seal strength testing: it is the seal of the heat sealing plastic bags and complete testing and packaging. The instrument is in test process of spiritual, LCD, communications, statistics and positive principle.

4.Medical guarantee resistance testing protective clothing impact the effective protection of the user. Impact testing of resistance property can be classified as a puncture and suspension.

A. Labthink Falling Dart Impact Tester BMC-B1: applies when considering the quality and energy of films and plastic sheets under the attack of the free-falling dart at altitudes of the theory of free fall, where projectile.

B. Labthink FIT-01 Film Impact Tester: is used to drop the amount of damage to the plastic film, laminated film, sheet sample with the head hemisphere to assess at certain speeds, so the analysis of this shock of the material by measuring the energy consumption of the head.

Protective Clothing 5.Medical

Estate tear test

Grief medical protective clothing, as result of external forces in the storage, transport and operation. Sufficient tensile strength and tear can reduce forces to avoid danger.

SLY-S1 Tear Tester corresponds to the Elmendorf method, and is applicable in tearing resistance test of films, laminates, films, paintings and paper.

Protective Clothing 6.Medical friction test (surface regularity)

A good uniformity of the two sides of the material of the clothing can to ensure good performance and a smooth transport and packing line.

A. MXD series of friction tester applicable in static and kinetic coefficient of friction test of plastic film, sheets, plates and papers. By testing the fineness of the materials, comfort and safety of medical protective clothing can not be guaranteed to meet the requirements. This series of products include MXD-01, MXD and MXD-01A-02.

as FTP-F1 Friction / Peel Tester: The computer control and allows test equipment friction between room temperature and 99.9 degrees Celsius and peel strength of laminates and adhesives. Check

7.Medical thickness of protective clothing

thickness, the basic index to test for the movies. uneven thickness influence on the tensile strength and barrier properties, and the next treatment.

A. CHY-C2 Thickness Gauge: it is measured for the measurement of films, plates and paper industrial processes with mechanical contact, without limitation to the materials. Importation of high quality sensor with a resolution of up to 0.1? m. The contact area and pressure between the sensor and the film / paper is strictly compliant, including multi-standards such as ISO and ASTM.

B. CHY-CA Thickness Gauge: is highly accurate up to 0.1 m apart, multi-point continuous self-test, LCD display, micro-printer, and other functions of statistics and communication?.

8.Medical protective fabric print quality tester

coat of paint adhesion: work YGJ-02 rolls tape and disk-01 BLJ peel test, the link layer of the ink test strength of the foil and cellophane (rolled, including transparency printer). Testers can also be used to the state of adhesion between layers, the outer layer compound and test clean.

CJD-01A-Friction Tester: For testing the abrasion resistance of the paint layers and the photosensitive layer falling off of the PS board to effectively analyze the problems of resistance to less wear color layer, low strength and stiffness of the lower layer press other products

Test RT-01 Rub. is for the color layer abrasion resistance testing of printed products. Arc moving fashion and design double-station. This tester is very effective and in accordance with ASTM, TAPPI and other international standards.

Labthink Instruments Co., Ltd.

No. 144 Wuyingshan Road, Jinan 250 031, China

Tracy Bao info@labthink.cn

Tel: 0086 531 85061153 Fax: 0086 531 85812140

medical oxygen